Budenberg Portable Industrial Dead-Weight Tester 15 to 1000 mbar / 1.5 to 100 kPa
Budenberg's BGP1P Portable Dead Weight Tester is a fully self contained primary pressure standard. Its ergonomic carry case contains the piston cylinder unit, mass set, pump, indicating gauge and connection hose - everything needed to carry out on-site, high-accuracy pressure calibrations.
The BGP1P has a 1/2in2 high chrome steel piston/cylinder unit.The design has been proven over many years to provide excellent sensitivity and stability. Low start pressure is achieved through use of a hollow piston and aluminium head.
NOTE: Model BGP1P can be used on vacuum with a model 24 adaptor for negative gauge pressure calibrations.
Budenberg's Dead-weight Testers are fully traceable to national standards via equipment with UKAS calibration certificates.
Standard accuracy without any corrections for actual area is 0.02% from 100 to 1000 mbar, 0.04% from 15 to 100 mbar. Higher accuracy Class A testers are available (supplied with UKAS Calibration certificates for area and mass) allowing an accuracy of 0.006% to be achieved.
- Ranges from 15 to 1000 mbar / 1.5 to 100 kPa
- Supplied with integral pressure generation
BGP120 by Budenberg Features
- Range: From 15 to 1000 mbar / 1.5 to 100 kPa
- Standard Accuracy: To 0.015%
- Class ‘A’ Accuracy: To 0.006%
- Accessories: Two gauge stand, carry cases,
- Piston/Cylinder Unit: 1/2in2 high chrome steel
- Weights: Austenitic stainless steel
The Budenberg is suitable for the following applications / industries
|
Oil & Gas
|
Petrochemical
|
BGP1P Pneumatic Dead-Weight Tester Specification Sheet Download
For more information on the BGP1P Dead Weight Tester
For more information on optional accessories