The BW Icon multi-gas detector for H2S / CO / O2 / LEL / SO2 provides ongoing protection for 2 years with no need to replace the sensors or battery. Honeywell BW™'s Icon is named for its display of simple icons for gas levels and device status. There are no live gas readings for workers to interpret and no time-consuming training, when there’s a gas alarm, the bell icon on the display will illuminate, along with an indicator next to the sensor in the alarm, so workers can quickly clear the area.
contact us for more information about the Honeywell BW™ Icon
Honeywell BW Icon
CO | H2S | O2 | LEL | SO2
Reliable
- 2 months of battery runtime on a 4.5-hour charge — and up to 4 months if you turn off the detector at the end of each shift. No daily charging, no unexpected downtime
- No service required, activate and use for two years
- Bluetooth is included for ease of downloading and sending reports via the Safety Suite App
Easy to use
- Small, lightweight, and wearable
- One-button operation
Easy to manage
- IntelliFlash™ green light indicates the detector is in compliance; amber light indicates the need for maintenance
- Compatible with IntelliDoX instrument management system and Honeywell Safety Suite
- Compatible with TouchConnect, using Bluetooth® for wireless configuration
- Monitoring four gases - oxygen (O2), hydrogen sulfide (H2S), combustible gas (LEL), and your choice of either carbon monoxide (CO) or sulfur dioxide (SO2)
BW Icon Specifications
| Size |
108.2 mm x 61.5 mm x 43.2 mm with Alligator Clip
108.2 mm x 61.5 mm x 37.8 mm with Klick Fast Stud
|
| Weight | 185 g (6.5 oz) with Alligator Clip, 169 g (6 oz) with Klick Fast Stud |
| Temperature | -40°C to 60°C |
| Working Humidity | 5% to 95% |
| Ingress Protection | IP66, IP68 |
| Alarms | Visual, vibrating, audible (95 dB); Low, High, TWA, STEL, Negative Drift, Over Limit, Multi-alarm |
| Self Test | Perform diagnostic of sensor, circuitry on activation; Activated detector automatically performs analog sensor diagnostic every 10 minutes, digital sensor diagnostic every second |
| Typical Battery Life | Two months (with NDIR CH4 sensor) |
| Connected Worker | Bluetooth® Low Energy (BLE) – Ability to connect to Honeywell’s Safety Communicator App, Device Configurator App and Safety Suite Device Configurator Software |
| User Options |
Change High, Low, TWA and STEL alarm set points
Latching alarms
Set Calibration and/or bump test reminders
Assign worker and location assignments
Always on
User options only available via Device Configurator and Safety Suite Device Configurator
|
| Warranty | Two-year warranty for sensors and detector |
| Certificates & Approvals | ATEX, IEC Ex, contains FCCID, contains IC |
BW Icon Sensor Specifications
| CO |
Measuring Range: 0 to 2000ppm
Resolution: 1ppm
Working Temperature: -40°C to 60°C
|
| H2S |
Measuring Range: 0 to 200ppm
Resolution: 1ppm (can set to 0.1ppm)
Working Temperature: -40°C to 60°C
|
| SO2 |
Measuring Range: 0 to 150ppm
Resolution: 0.1ppm
Working Temperature: -20°C to 50°C intermittent -40°C to 55°C
|
| O2 |
Measuring Range: 0 to 30% VOL
Resolution: 0.1% VOL
Working Temperature: -40°C to 60°C
|
| NDIR-CH4 |
Measuring Range: 0 to 100% LEL
Resolution: 1% LEL
Working Temperature: -40°C to 60°C
|
Caution: The infrared LEL sensor used in Honeywell BW™ Icon cannot detect hydrogen and acetylene. For applications involving these combustible gases, consider a catalytic-bead LEL sensor as found in the Honeywell BW™ MicroClip Series.
Accessories suited to the BW Icon portable gas monitor
|
IntelliDoX Calibration DockThe IntelliDoX system combines smart docking modules and device management software to provide automated instrument management for Honeywell Gas Detectors. [Replaces the MicroDock II by Honeywell] MicroClip Series gas detector compatible - helping you drive productivity, reliability and efficiency. |
Download more information on the Honeywell BW Icon