HEAD OFFICE 07 38651139  CHINCHILLA 1800 234 477

Intech Process Indicators

 

{module Indicators}

 

Intech IN-P Multifunction Indicator

The IN-P Multifunction Indicator with relay output options, interfaces smoothly with a wide range of PLC and monitoring systems. It is a stand alone unit for single or multi point indication, alarm or control that will interface with a wide range of PLC's. Setup and calibration is simple, with on-screen, step-by-step instructions. The IN-P has a 6-digit LED display, 6 set-points and 5 front panel buttons for easy setup and operator interface. Up to 6 relay outputs, an analogue output and/or an RS485/RS232/Ethernet port can also be added.

Features: 

  • Simple setup and calibration.
  • On Screen Step by Step Instructions.
  • 5 Buttons for easy Operator Interface.
  • 6 Digit LED Display.
  • Option to add up to 6 Relay outputs.
  • Analogue Output Retransmission option.
  • Serial RS485/RS232 port option with Modbus RTU.
    Ethernet port option with Modbus TCP.
  • Wide Range of Power Supply options from 10V to 265V.
  • Multiple functions available for customising to your application.

Intech IN-R Tachometer Indicator

The IN-R is a technically advanced but cost effective microprocessor-based indicator designed specifically for use in tachometer applications. Options for up to four relay outputs make it ideal for stand-alone control or as a PLC interface. Intuitive scrolling text menus, (activated from the front panel), guide you step by step through the setup and calibration process, and the large 4-digit display ensures that the figures can be easily read from a distance.

Features:

  • Large 4 Digit LED Display.
  • Microprocessor Based for Wide Range Calibration.
  • Inputs: 0~30V, magnetic pickup, NPN, PNP, TTL, Namur.
  • 4 Set Points with delay.
  • 4 LED’s for Alarm indication.
  • Analogue Output Retransmission option.
  • Simple setup and calibration.
  • On Screen Step by Step Instructions.
  • 5 Buttons for easy Operator Interface.
  • Wide Range of Power Supply options from 10V to 265V.
  • Excitation supply 24Vdc.

Intech IN-RT Flow Rate Indicator

The IN-RT indicator is the ideal solution for a variety of flow rate application requirements. This indicator, with four relay outputs, has been designed for ease of use; with intuitive, scrolling text prompts that guide you step-by-step through the setup process. The front panel includes a 6-digit LED display and five front-panel buttons, for simple operator interface. Up to four relay outputs, an analogue output and/or an RS485/RS232 serial port can also be added.

Features:

  • 6 Digit LED Display.
  • Inputs: 0~30V, magnetic pickup, NPN, PNP, TTL, Namur.
  • 4 Set Points with delay.
  • Analogue Output Retransmission option.
  • Serial RS485/RS232 port option with Modbus RTU.
  • Simple setup and calibration.
  • On Screen Step by Step Instructions.
  • 5 Buttons for easy Operator Interface.
  • Wide Range of Power Supply options from 10V to 265V.
  • Excitation supply 24Vdc.

Intech IN-RTB Flow Rate Indicator

The IN-RTB controller is the ideal solution for a variety of flow rate and batching applications. This controller, with four relay outputs, has been designed for ease of use, with intuitive, scrolling text prompts that guide you step-by-step through the setup process. The front panel includes two rows of 6-digits and five front-panel buttons, for simple operator interface. The dual display allows you to view total and flow rate simultaneously. Up to four relay outputs, an analogue output and/or an RS485/RS232 serial port can also be added.

Features:

  • Dual 6 Digit LED Displays.
  • View Flow Rate & Total simultaneously.
  • Inputs: 0~30V, magnetic pickup, NPN, PNP, TTL, Namur.
  • 5 Set Points annunciator LED’s.
  • Analogue Output Retransmission option.
  • Serial RS485/RS232 port option with Modbus RTU.
  • Simple setup and calibration.
  • On Screen Step by Step Instructions.
  • 5 Buttons for easy Operator Interface.
  • Wide Range Power Supply options from 10V to 265V.
  • Excitation supply 24Vdc.

Intech IN-uP4 Universal Input Indicator

The IN-uP4 is a universal single input indicator, which makes interface with a wide range of sensors easy. The IN-uP4 has a 4-digit LED display. An option to add two relay outputs (with two setpoint indicator LED’s), and one 4~20mA analogue output is available. The indicator (Rev 1) has a Universal Power Supply of 24~250Vac / 19.5~250Vdc. Setup and calibration is simple, using ‘uP Configure’ software, with step-by-step instructions.

Features:

  • Universal Input with Indication.
  • Panel Mount.
  • Programmable via USB Port using uP Configure software and XU-USB (Rev 1) key.
  • Simple setup and calibration.
  • 4-digit LED Display.
  • Option to add Two Relay Outputs (with two setpoint indicator LED’s), and One 4~20mA Analogue Output.
  • Universal Power Supply of 24~250Vac / 19.5~250Vdc.
  • Sensor Power Supply for powering external Transmitter.
  • Dimensions: H=48mm, W=95mm, D=84mm.
  • IP65.
  • Low Cost.

Intech uP4 Universal Input Indicator

The uP4-Din is a DIN rail mount, universal single input indicator, which gives easy interface with a wide range of sensors. It is also fitted with two relay outputs (with two setpoint indicator LEDs), and one optional retransmission analogue output (4~20mA or 0~10Vdc selectable). The uP4-Din has a 4-digit LED front display, and a universal power supply of 24~250Vac / 19.5~250Vdc. Setup and calibration is simple, using ‘uP Configure’ software (version 1.5.23 or later), with step-by-step instructions.

Features:

  • Universal Input with Indication.
  • DIN Rail Mount.
  • Universal AC or DC supply 24~250Vac / 19.5~250Vdc.
  • Two Relay Outputs (with Setpoint LEDs).
  • Option to add One Retrans Analogue Output (4~20mA or 0~10Vdc selectable).
  • Programmable via USB Port using uP Configure Programming Software (version 1.5.23 or later) and the XU-USB (Rev 1) key.
  • Simple setup and calibration.
  • 4-digit LED display with Transparent Cover.
  • Sensor power supply for powering external transmitter.
  • Dimensions

Intech LPI-LCD-5 Loop Powered Indicator

The LPI-LCD-5 is a compact 5 digit display indicator. It has effortless front-panel programming and simple, step-by-step calibration procedures (Requires 4~20mA Calibrator), high resolution (50,000 count) and is easily software scalable to any engineering unit of measurement. It is suited for mounting in confined spaces with it's short-depth case.

Intech LPI-LCD-6 4~6mA Panel Display

The LPI-LCD-6 is ideal for displaying a variety of process variables, it is easy to scael to your required engineering units.

Features:

  • Easy installation (front mounting unit takes up virtually no space behind the panel).
  • Loop powered display backlight.
  • Protection against reverse wiring and accidental 24V supply.
  • Easy calibration via on-screen menu. 4~20mA Calibrator is NOT required!