The 12X series pressure manifolds are designed for expanding pressure test ports during pressure calibration.
ADT121 series Pressure Manifolds / Pneumatic
ADT123 series Pressure Manifolds / Hydraulic
ADT125 series Pressure Manifolds / Pneumatic
ADT126 series Pressure Manifolds /Hydraulic
The ADT12X series pressure manifolds by Additel are designed for expanding pressure test ports during pressure calibration.
The Additel ADT121 and ADT125 pressure manifolds are used for pneumatic pressure calibration up to 3000 psi (200bar), while the Additel ADT123 and ADT126 manifolds are compatible to hydraulic pressure applications up to 10,000 psi (700 bar). A filter is built-in with the ADT121 and ADT125 pneumatic pressure manifolds to prevent contamination introduced by devices under test. There are four hand-tight quick connectors pre-installed on each manifold. The manifold arms of the ADT125 and ADT126 are foldable to allow the user to adjust the position of the DUTs.
Additel's ADT12X series pressure manifolds allow you to connect without the use of wrenches or Teflon tape which increases your productivity when using calibration pumps, pressure controllers, dead weight testers, or piston gauges.